Aimpoint Express Calibration Board

Description

The new AimPoint Express Calibration Board is quick and easy to set up and can be used both outdoors on the practice green and indoors on synthetic turf.
The Calibration Boards are equipped with two pegs for driving into the ground making the board stable; four out of the total six, the boards are folded on themselves in order to be more easily transportable and, once unfold, they are ready to be placed on the green.

Available in 2 versions: 6 boards with the same stimp on both sides of the board

 

For indoor use on an artificial turf, use the two red supports and lock the board in correspondence with the fold with the clip supplied in the package. Follow the instructions to place the clip on the board.

1) thread the tee-peg into the clip and then bend it 90° downwards to spread it out and fit it easily on the high edge of the board.

_

2) bring it close to the edge of the board and gently push the clip; remove the tee peg.

_

3) Gently slide the clip halfway to the board’s bend point.

4) place the supports in correspondence with the pegs of the lower part of the board and it is ready to be used.Repeat this operation if you want to change the stimp of the Calibration Board.

 

CONTENT OF PACKAGE
•6 Calibration Boards double side from 7 to 12 of stimp;
•2 board support tools;
•1 clear shell with 8 coloured pegs (2 green, 2 red, 2 blue and 2 yellow) to set on the green from 3 through 10 feet to the hole;
•1 clip to fix the foldable board (indoor use);
•1 tee peg